d'Action Download Center

Top     d'Action Download Center

DC4000RA

d'Action 360D

Firmware

Date

Size

 

DC4000RA Ver 1.1.2

12/26/2022

14.4MB
Download

Notes:

・Use the provided communication cable to connect the camera to the PC.
・Do not turn off the power to the camera while updating.

DC5000A

d'Action 360S

Firmware

Date

Size

 

DC5000A Ver 2.0.1

7/28/2021

9.7MB
Download

Notes:

・To update the firmware for your device, you can use either a smartphone application or a PC.
・If you are unable to update the firmware using a smartphone, then you should try updating it using a PC.
・If the memory LED is blinking orange and you are unable to update the firmware, you should turn off Bluetooth on your smartphone and try again.
・If you are still unable to update the firmware, then you should try updating it using a PC.
・Depending on the timing of communication, the message "Do you want to update?" may appear even after the update is complete. In this case, simply restart the application and the message will disappear.
・If an error or freeze occurs during the update process, you should disconnect the power cable from the main unit and wait for about 5 minutes before turning it on again. This should help resolve any issues and allow you to retry the update process.


DC3000A

d'Action 360

Firmware

Date

Size

 

DC3000A Ver 3.0.0

3/22/2021

10.1MB
Download

Notes:

・Please update the firmware using the smartphone application or a PC.
・If you can't update using a smartphone, please update using a PC.
・Normally, the update takes only a few seconds, but if you're updating to Version 2.0.0 or later, it may take more than 2 minutes due to the GPS module update.
・If the memory LED blinks orange and the update fails, try turning off Bluetooth on the smartphone and try again. If it still fails, try updating via a PC.
・Depending on the communication timing, the message "Do you want to update?" may appear even after the update is complete. In this case, restart the application and the message will disappear.
・If an error or freeze occurs, disconnect the power cable from the main unit and turn it on again after about 5 minutes.